|Place Of Origin:||Guangdong, China||Power:||Electronic|
|Brand:||Sanwood||Temperature Control:||Touch Screen Controller|
225L Temperature Test Chamber,
Touch Screen Temperature Test Chamber,
Explosion Proof Temperature Test Chamber
225L Battery Ex-proof Temperature Test Chamber Electrical Test per IEC61960
225L Battery Ex-proof Temperature Test chamber, is a standard model from Sanwood Battery explosion proof test chambers. Battery ex-proof temperature test chamber, also name as battery climatic chamber, battery environmental chamber, battery explosion proof Climate Chamber, battery high low temperature test chamber, is mainly used to test various batteries from 3C products, automotives, aerospace, transportation, marines, etc. Battery Ex-proof Temperature Test chamber, is applied to do battery electrical tests, environmental tests, performance test and storage, etc. Sanwood battery test chambers are mainly served the end users of battery manufacturers, Research institutes and test laboratories.
Battery ex-proof temperature test chamber safety devices:
Depends on the different application, the explosion proof safety devices are equipped accordingly to EUCAR, or USCAR HL, etc.
1. Standard configuration : ∅100MM pressure relief port, 1 set explosion-prood door chains; 3-color status indicator;
2. Air intake and exhaust device: Intake fresh air and exhaust harmful gases out.
3. Multipoint temperature monitor system: adopts Sanwood developed controller, which can be used to acquire surface temperature points of multiple products
3. C02 fire extinguisher - fire extinguishing system default CO2 cyclinder and spray system, smoke sensor. Manual and automatic shutoff the fire when chamber the fire extinguishing alarm.
4. C0, H2 gas detector - can detect over 30 types of gases. When the concentration of any gas over the limit, the system will alarm and give signal to the chamber.
5. Insulation coating of the inner side walls of the chamber.
|Cooling rate||130.0℃～-20.0℃ 1.0～2.0℃/min|
|Temperature uniformity||±1.5℃ (-20.0℃～100.0℃)|
|Internal material||SUS304 stainless steel(1.2mm)|
|External material||cold-rolled plate(1.2mm),powder coating|
|Heat insulation||polyurethane foam(100mm)+glass wool(10mm)|
|Fan||Centrifugal fan(Impeller Fan)|
|Refrigeration compressor||hermetic compressor|
|Cooling mode||air cooling or water cooling|
|Heater||nickel chrome strip heater|
|Working Temperature||+5 ~ 35℃|
|Power supply||220V/AC 50/60Hz single phase|
|Controller||Standard SANWOOD touch screen, programmable|
GB 31241-2014, GB/T 18287 -2013,GB/T 8897.6-2008,YD/T 2366.1-2011,GB/T 21966-2008, IEC 62660, IEC 60082, IEC 61960, IEEE 1625
* Customized features and sizes are available. Welcome to inquiry Sanwood sales team for a professional test solution.
Contact Person: Nancy Shen