|Place Of Origin:||Guangdong, China||Power:||Electronic|
|Brand Name:||Sanwood||Usage:||Stability Temperature Humidity|
|Certification:||CE AND ISO||Warranty:||12 Months|
Three Zone Thermal Shock Test Chamber,
SUS304 Thermal Shock Test Chamber,
80L Thermal Shock Test Chamber
Three Zone Thermal Shock Test Equipment Chamber Hot Cold Temperature Resistance
Three Zones Thermal Shock High Low Temperature Testing Chamber with touch screen controller is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm, which is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality.
Thermal Shock Test Chamber -General introduction
High low temperature(Three Zone)Thermal shock chamber is consist of High temperature test area(Pre-heating area), Low temperature test area(Pre-cooling)area and test area(RT), adopt independent wind path switching mode to transfer hot and cold air to test area make sure the high low temperature swift, the test sample shall not move during the test. The test chaber is suitable for the examination of the whole set of products, components, parts and materials subjected to rapid changes in temperature. The temperature impact test chamber are used in a shortest time to evaluate the test samples due to thermal expansion and contraction caused by the changes of chemical or physical damage. materials industry .
|25.0℃～-70.0℃ Within 60 mins 1.0～3.0℃/min|
|25.0℃～200.0℃ Within 60 mins 3.0～7.0℃/min|
|Within 5 mins||Within 10 mins|
|Internal material||Stainless steel(SUS304)|
|External material||Cold rolled steel sheet / powder spraying|
|100mm thickness polyurethane plate＋10mm thickness mineral wool|
|Fan 风机||Centrifugal blower|
|Compressor||France Tecumseh, Germany Bock, Germany Bitzer|
|Condenser||Air cooling, water cooling||water cooling|
|Evaporator||Fin - and - Tube Heat Exchanger|
|Heater||Nickel chromium alloy heating wire|
|Power supply||380V AC 50/60Hz|
|Controller||SANWOOD SH5600:Equipped with RS232 port；(7.0 inch controller) USB data export )|
Thermal Shock Test Chamber- Product accessories
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
Compressed air drying filter
Thermal Shock Test Chamber -Optional equipment
Isolated transducer, Protection device for testing product ( Sample protection to meet the standards NE60519-2.1993)
100mm diameter Pin hole
Nitrogen auxiliary device
Spare parts package
E management and Networking software
Video monitoring system
APP mobile platform management
SANWOOD Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established.
Our products upgrade constantly and our customers come portable batteries, power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric bicycles, electric tools, electric systems, solar, military, universities research and other technology industries fields.
Products are exported to more than 30 countries, such as Russia, Singapore, the United States, Turkey, Denmark, Vietnam, India, Malaysia, Kazakhstan, Austria, Canada, etc.
Sanwood thrived little by little and aims to become the leading brand in the safety and reliability environmental test equipment industry all over the worldber.
Contact Person: Nancy Shen