|
Product Details:
|
| Place Of Origin: | Guangdong, China | Power: | Electronic |
|---|---|---|---|
| Brand Name: | Sanwood | Usage: | Stability Temperature Humidity |
| Certification: | CE AND ISO | Warranty: | 12 Months |
| High Light: | temperature and humidity test chamber,temperature and humidity chamber |
||
Combined Environmental Battery High and Low Temperature Explosion-proof Test Chamber
High and low temperature explosion-proof test chamberStructure and Characteristics:
1.It is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system.
2.The working chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying.
3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber.
4.Temperature and humidity control adopts Korean import TEMI360 programmable touch screen temperature and humidity controller, with automatic calculation of PID function.
5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water.
6.Refrigeration system adopts original France "Taikang" refrigeration unit and full sets of refrigeration parts.
7.Input mode PT100 sensor.
8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
9.Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber.
10.With larger transparent viewing window and lighting inside to observe the test.
11.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions.
12.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement.
13.With various of safety protection device such as leakage and outage protection,compressor overpressure protection,overload fusing protection,audio signal alarm.
High and Low Temperature Explosion-proof Test Chamber Specification:
| Model | SMC-408-CC-FB | SMC-800-CC-FB | SMC-1000-CC-FB | SMC-1500-CC-FB | |
| Temperature | Temperature control range |
-70℃～180℃ (A:0℃～180℃;B:-20℃～180℃；C:-40℃～180℃;D:-70℃～180℃) |
|||
| Temperature fluctuation | ±0.5℃ | ||||
| Cooling rate | 180.0℃～-70.0℃ Within 100 mins 1.0～3.0℃/min | ||||
| Heating rate | -70.0℃～180.0℃ Within 60 mins 3.0～5.0℃/min | ||||
| Temperature uniformity | ±1.5℃ (-40.0℃～100.0℃) | ||||
| ±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃) | |||||
| Humidity | Humidity control range | 10.0%RH～98.0%RH (60℃ above corresponds to 10%RH) | |||
| Humidity fluctuation | ±1.0% RH | ||||
| Humidity uniformity | ±2.0％RH | ||||
| Material / components |
Internal material | Adopts 1.2mm thickness stainess steel(SUS304) | |||
| External material | Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying | ||||
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | ||||
| Fan | Centrifugal blower | ||||
| Compressor | Semi-closed Germany Bock, Germany Bitzer | ||||
| Condenser | Air cooling, water cooling | ||||
| Refrigerant | R404A,R23,R508 | ||||
| Evaporator | Fin - and - Tube Heat Exchanger | ||||
| Heater | Nickel chromium alloy heating wire | ||||
| Humidifier | Steam humidifier | ||||
| Options | Standard configuration | 2 ∅100MM pressure relief port, 4 explosion-prood chains | |||
| Multipoint temperature monitor |
Adopts Sanwood developed controller, which can be used to acquire surface temperature points of multiple products |
||||
| C02 fire extinguisher | Automatic fire extinguishing and automatic shutdown of the machine to protect the equipment from burning |
||||
| C0, H2 gas detector | When the battery will produce gas, it will detect gas solubility and discharge to outdoor when it exceeds the standard |
||||
| Exhaust valve | When the test sample produces harmful gas, ventilate and exhaust internally | ||||
| Size | Interior size(mm) W*H*D |
800*850*600 | 1000*1000*800 | 1000*1000*1000 | 1200*1000*1250 |
| Outer size(mm) W*H*D |
1000*2050*1400 | 1200*2100*1590 | 1200*100*1780 | 1400*2100*2030 | |
| Volume(m³) | 408L | 800L | 1000L | 1500L | |
| Weight | 620 | 680 | 840 | 955 | |
| Operating ambient temperature | +5 ~ 35℃ | ||||
| Power supply | 380V AC 50/60Hz 17A |
380V AC 50/60Hz 25A |
380V AC 50/60Hz 27A |
380V AC 50/60Hz 50A |
|
| Controller | Standard: South Korea TEMI-1500 Optional: South Korea TEMI-2500,South Korea TEMI-2700 |
||||
Contact Person: Nancy Shen
Tel: +86-769-81182799
