Programmable Thermal Cycling Chamber Low Impact With One Year Warranty

Programmable Hot And Cold Temperature Thermal Cycling Low Impact Testing Machine Test Shock Relative Humidity Chamber

The advantages of SANWOOD thermal shock test chamber
1.Temperature and humidity setting protection
2.Two zone thermal shock test chamber. Air pressure driven test area(sample)
3.Error failure medical record table cartilage device
4.HFC environmentally friendly refrigerant, SWEP plate heat exchanger, two type refrigeration system
5.Optimal structure and high efficiency refrigeration machinery design
6.Air intakes and returns with sensor control
7.Sever Valve, Kinetic energy automatic load control
8.Testing range: 150(60)℃~ (-10)-65℃
9.50% power saving efficiency and automatic servo control
10.Compatible with BUS CM remote monitoring management system
11.Can expanded: LN2V liquid nitrogen rapid cooling control device
12.Thermal shock test chamber movement time is 10 seconds.Can meet MIL, IEC and JIS standard.
13.Wind valve switching time is 10 seconds
14. Thermal shock test chamber temperature recovery time is 5 minutes, can meet the test specification
15.The end of the experiment, the product automatically return to the normal temperature to avoid frost dew
16.The world's first built-in USB2.0 interface digital recorder (recording can be plugged in at any time)
17.Industrial grade upright full-color touch multilingual programmable control system
18.The world's first standard shipping included USB2.0 and disk storage machine dual interface
19.The protective mechanism of return to normal temperature after the test is finished.
20.The world's first complete test curve analysis shows that there is no time limit.

SERVICE POLICY

Perfect pre-sale, sale, medium and after sale management system

Pre-Sale

01. After the completion of product packaging, the professional service personnel will sent the packaging process to the customer. And tell the customer what time of delivery, and what is the way of logistics (Such as: sea, land, air. We can select the modes of transport according to customer requirements

02.We will actively communicate with customers before delivery, to allow customers to prepare ahead of water, electricity, gas and other installation requirements of site.

03.Before delivery, if the customer need, can arrange engineers to our factory, we provide free products debugging training. We can also provide pick up and arrange accommodation.

04.We will provide free accessories and some commonly used goods issued, for subsequent customer maintenance. (Such as: wet bulb gauze, relays etc.)

In Sale

01.A professional customer service personnel will inform the cargo departure time, and the expected arrival time.

02.In the transport of goods at the same time, we will let the related product manual, operation manual and installation of video, and related circuit diagram, structure diagram, frozen map to the customer for reference.

03.When customers get the goods, we will use video to help customers to install equipment till it can
be used normally.

After sales

01.Our professional customer service will have a telephone or email for the use of customers every 2 months, know about the customers' using, provide timely help.

02.If the customer have problems arised in the use of equipment, when we receive the feedback questions, we will give response within 2 hours. And give solutions within 24 hours.

03.If you need to replace the parts. Within a year ,we can provide customers with appropriate accessories free of charge, and online to assist customers to complete the replacement parts , until the machine running properly .

04.If necessary, we can arrange professional technical engineers to provide on-site service free of charge, but customers may need to undertake some travel expenses for our technical engineers.

OUR COOPERATIVE

Our company and many other companies formed a friendly and cooperative partnership