|
Product Details:
|
| Place Of Origin: | Guangdong, China | Power: | Electronic |
|---|---|---|---|
| Brand Name: | Sanwood | Usage: | Stability Temperature Humidity |
| Certification: | CE AND ISO | Warranty: | 12 Months |
| High Light: | R449A Temperature Humidity Test Chamber,Programmable Temperature Humidity Test Chamber,14.5m3 Temperature Humidity Test Chamber |
||
Programmable Stability Temperature Humidity Test Chamber
High Low Temperature Climatic Test for Vehicle Industries
Temperature and Humidity Test Chamber Basic introduction:
Walk-in type Temperature (& Humidity) Test Chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.
It provides a large space to simulate the temperature and humidity environment for large-scale parts, semi-finished products, it applied to test products that large-scale or the quantity more, such as: computer terminals, vehicle parts, automotive components.
Walk-in Temperature (& Humidity) Test Chamber meet the requirements of international standard (IEC, JIS, GB, MIL...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods). To avoid different cognitive, and reduce uncertainly factors scope of measurement.
Walk-in Temperature (& Humidity) Test Chamber Product features:
1. Apply to larger size products test or large amount products test
2. Standard modular design stainless steel plate and salt steel as the main material
3. Can open the door from chamber inside.
4. Full-color multi-language programmable touch control system
5. Strong and powerful German bock semi hermetic compressor
6. Multi-group solenoid valve, the most appropriate amount of refrigerant control
7. Synchronous safety control of testing power supply and safety protection device for testing products
8. According to customers size and design required, we can provide them corresponding scheme
9. Energy-saving 30%, water-saving 20%; Environment-friendly refrigerant
10. Four groups of temperature. A set of humidity sensor control
11. Heating load automatic servo control to adjust refrigerant flow rate, which can withstand the traditional constant temperature and humidity room heat load of more than 3 times
Walk-in environmental test chamber technical parameters:
| Model | SMC-145-CC-WT | |
| Temperature | Temperature control range | -40℃～80℃ |
| Temperature fluctuation | ±0.5℃ | |
| Cooling rate | 80.0℃～-40.0℃ Within 110 mins 1.0～2.0℃/min | |
| Heating rate | -40.0℃～80.0℃ Within 70 mins 2.0～5.0℃/min | |
| Temperature uniformity | ±2.0℃ (-40.0℃～80.0℃) | |
| Humidity | Humidity control range | 20.0%RH～95.0%RH |
| Humidity fluctuation | ±1.5% RH | |
| Humidity uniformity | ±3.0％RH | |
| Material / components |
Internal material | Stainless steel(SUS304) |
| External material | Cold rolled steel sheet / powder spraying | |
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | |
| Fan | Centrifugal blower | |
| Compressor | Semi-closed Germany Bock, Germany Bitzer | |
| Condenser | Water-cooled | |
| Refrigerant | R449A (Low GWP) | |
| Evaporator | Fin - and - Tube Heat Exchanger | |
| Heater | Nickel chromium alloy heating wire | |
| Humidifier | Steam humidifier | |
| Size | Interior size(mm) W*H*D | 2000*2000*3625 |
| Outer size(mm) W*H*D | 2250*2250*5250 | |
| Volume(m³) | 14.5m³ | |
| Operating ambient temperature | +5 ~ 35℃ | |
| Power supply | 380V AC 50/60Hz | |
| Controller | SANWOOD customized controller, ethernet interface to remote control to PC | |
Contact Person: Nancy Shen
Tel: +8618025256059
