|
Product Details:
|
| Temperature Impact Range: | -70℃～150℃ （A:-45℃～150℃;B:-70℃～150℃) | Temperature Fluctuation: | ±1.0℃ |
|---|---|---|---|
| Temperature Conversion Time: | 3S | Internal Material: | Stainless Steel(SUS304) |
| External Material: | Cold Rolled Steel Sheet / Powder Spraying | Heat Insulating Material: | 100mm Thickness Polyurethane Plate＋10mm Thickness Mineral Wool |
| High Light: | thermal shock test equipment,thermal test chamber |
||
2-zone Basket Type Thermal Shock Chamber With LCD Controller Bock Compressor
Brief introduction of User friendly Programmable Thermal Shock Test Chamber:
The equipment is mainly designed according to the national standard and user-defined requirements. It can simulate different environmental conditions, such as heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, which defines the performance of material. By testing the product under different environmental conditions to see whether its performance can meet the intended requirements. It is widely applied in the industries of electronics, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, and other product components and materials
Application:
Thermal Shock Test Chamber is used to quickly find the hidden mechanical weaknesses in electronic components when test specimens are exposed to rapid thermal shock condition, and you will not only reduce the premature failures but also increase the reliability of your products when you choose our thermal shock test chamber.
| Model | SM-50-3P-A | SM-80-3P-A | SM-100-3P-A | SM-150-3P-A | SM-200-3P-A | SM-300-3P-A | SM-500-3P-A | |
| Temperature | Temperature impact range |
-70℃～150℃ (A:-45℃～150℃;B:-70℃～150℃) | ||||||
| Temperature fluctuation |
±1.0℃ | |||||||
| Low temperature precooling time |
25.0℃～-70.0℃ Within 60 mins 1.0～3.0℃/min | |||||||
| High temperature preheating time |
25.0℃～200.0℃ Within 60 mins 3.0～7.0℃/min | |||||||
| Temperature conversion time |
3S | |||||||
| Temperature recovery time |
Within 5 mins | Within 10 mins | ||||||
| Material / components |
Internal material | Stainless steel(SUS304) | ||||||
| External material | Cold rolled steel sheet / powder spraying | |||||||
| Heat insulating material |
100mm thickness polyurethane plate＋10mm thickness mineral wool | |||||||
| Fan | Centrifugal blower | |||||||
| Compressor | France Tecumseh, Germany Bock, Germany Bitzer | |||||||
| Condenser | Air cooling, water cooling | water cooling | ||||||
| Refrigerant | R404A,R23,R508 | |||||||
| Evaporator | Fin - and - Tube Heat Exchanger | |||||||
| Heater | Nickel chromium alloy heating wire | |||||||
| Size | Interior size(mm) W*H*D |
350*400 *350 |
400*500 *400 |
500*500 *400 |
500*600 *500 |
650*460 *670 |
960*460 *670 |
960*650 *800 |
| Outer size(mm) W*H*D |
1400*1750 *1750 |
1450*1850 *1800 |
1550*1850 *1800 |
1550*2050 *2050 |
1700*2000 *2200 |
2050*2000 *2250 |
2050*2150 *2450 |
|
| Volume(L) | 50L | 80L | 100L | 150L | 200L | 300L | 500L | |
| Operating ambient temperature | +5 ~ 35℃ | |||||||
| Power supply | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz |
380V AC 50/60Hz |
380V AC 50/60Hz |
380V AC 50/60Hz |
380V AC 50/60Hz |
|
| Controller | SANWOOD SH5600:Equipped with RS232 port；(7.0 inch controller) USB data export ) | |||||||
Product Catalog:
Two Zone Thermal ShockTest Chamber.pdf
Contact Person: Nancy Shen
Tel: +8618025256059
