|Place Of Origin:||Guangdong, China||Power:||Electronic|
|Usage:||High Low Temperature||Certification:||CE AND ISO|
|Warranty:||12 Months||Controller:||Programmable Controller, Touch Screen|
temperature and humidity test chamber,
temperature and humidity chamber
High and Low Temperature Explosion-proof test chamber for Battery Test
Structure and Characteristics:
1.It is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system.
2.The working chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying.
3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber.
4.Temperature and humidity control adopts Korean import TEMI360 programmable touch screen temperature and humidity controller, with automatic calculation of PID function.
5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water.
6.Refrigeration system adopts original France "Taikang" refrigeration unit and full sets of refrigeration parts.
7.Input mode PT100 sensor.
8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
9.Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber.
10.With larger transparent viewing window and lighting inside to observe the test.
11.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions.
12.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement.
13.With various of safety protection device such as leakage and outage protection,compressor overpressure protection,overload fusing protection,audio signal alarm.
High and Low Temperature Explosion-proof Test Chamber Specification:
|Cooling rate||180.0℃～-70.0℃ Within 100 mins 1.0～3.0℃/min|
|Heating rate||-70.0℃～180.0℃ Within 60 mins C43.0～5.0℃/min|
|Temperature uniformity||±1.5℃ (-40.0℃～100.0℃)|
|Internal material||Adopts 1.2mm thickness stainess steel(SUS304)|
|External material||Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying|
|Heat insulating material||100mm thickness polyurethane plate＋10mm thickness mineral wool|
|Compressor||Semi-closed Germany Bock, Germany Bitzer|
|Condenser||Air cooling, water cooling|
|Evaporator||Fin - and - Tube Heat Exchanger|
|Heater||Nickel chromium alloy heating wire|
|Options||Standard configuration||2 ∅100MM pressure relief port, 4 explosion-prood chains|
|Adopts Sanwood developed controller, which can be used to acquire surface temperature points of multiple products|
|C02 fire extinguisher||Automatic fire extinguishing and automatic shutdown of the machine to protect the equipment from burning|
|C0, H2 gas detector||When the battery will produce gas, it will detect gas solubility and discharge to outdoor when it exceeds the standard|
|Exhaust valve||When the test sample produces harmful gas, ventilate and exhaust internally|
|Operating ambient temperature||+5 ~ 35℃|
|Power supply||220V AC 50/60Hz 22A||220V AC 50/60Hz 31A||220V AC 50/60Hz 33A||380V AC 50/60Hz 17A||380V AC 50/60Hz 25A||380V AC 50/60Hz 27A||380V AC 50/60Hz 50A|
|Controller||Standard: South Korea TEMI-1500 Optional: South Korea TEMI-2500,South Korea TEMI-2700|
Sanwood Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established. And has become a private science and technology enterprises in Dongguan,Guangdong Province, which passed the lSO9001:2008 quality system certification.
Having experienced nearly 20 years efforts, we have successfully developed a series of products: High and low temperature test chamber ,, explosion-proof type hot box, explosion-proof type thermal shock chamber, walk-in temperature and humidity chamber, an explosion-proof type temperature test box, rain test chamber, dust test box, weather resistance test chamber, seawater immersion box, Temperature&humidity&Vibration integrated test chamber, battery thermal abuse test box, ozone test box, xenon lamp test chamber, high temperature oven, , vibration table. All of products meet GB31241,IE62133,QCT/743,UN38.3,UL2054 Standard. And we have had a good cooperation with ATL, Sony, Sunwoda, Desay, Samsung, BYD, Toyota, Yutong Bus, Nissan, Guangdong Province entry-exit, Tsinghua University, Henan University, Chinese Academy of Sciences, Central South University Successively.
Sanwood Technology has established a large production base in Dongguan after many years efforts. The plant area reached more than 12000 square meters. The foreign trade branch and foreign service agencies were established in 2010. And branches successively established in Taiwan, Suzhou, Hunan, Hubei, Beijing, Henan. Excellent products and good after-sales service make us won the recognition and trust of customers. Products are exported to more than 30 countries, such as Russia, Singapore, the United States, Turkey, Denmark, Vietnam, India, Malaysia, Kazakhstan, Austria, Canada, etc. In the age with fierce competitions, Sanwood thrived little by little and aims to become the leading brand in the safety and reliability environmental test equipment industry all over the world.
PERFECT ERP MANAGEMENT SYSTEM
Perfect ERP management system,Improve the efficiency of enterprise management
The production department includes sheet metal, welding, circuit assembly and other departments with
strong production capacity
Welding Circuit Sheet Metal
Before delivery, professional testing personnel to test the equipment, determine the problem
before arranging delivery
Carefully pack and type wooden cases for each device to ensure that each device arrives safely
at the customer's destination
Environmental chamber have passed all the inspection and ready for packing
Paper angel bead Bubble bag Fixed wooden case
We packed with fumigation and wooden case to protect the goods from any damage
Perfect pre-sale, sale, medium and after sale management system
01. After the completion of product packaging, the professional service personnel will sent the packaging process to the customer. And tell the customer what time of delivery, and what is the way of logistics (Such as: sea, land, air. We can select the modes of transport according to customer requirements
02.We will actively communicate with customers before delivery, to allow customers to prepare ahead of water, electricity, gas and other installation requirements of site.
03.Before delivery, if the customer need, can arrange engineers to our factory, we provide free products debugging training. We can also provide pick up and arrange accommodation.
04.We will provide free accessories and some commonly used goods issued, for subsequent customer maintenance. (Such as: wet bulb gauze, relays etc.)
01.A professional customer service personnel will inform the cargo departure time, and the expected arrival time.
02.In the transport of goods at the same time, we will let the related product manual, operation manual and installation of video, and related circuit diagram, structure diagram, frozen map to the customer for reference.
03.When customers get the goods, we will use video to help customers to install equipment till it can
be used normally.
01.Our professional customer service will have a telephone or email for the use of customers every 2 months, know about the customers' using, provide timely help.
02.If the customer have problems arised in the use of equipment, when we receive the feedback questions, we will give response within 2 hours. And give solutions within 24 hours.
03.If you need to replace the parts. Within a year ,we can provide customers with appropriate accessories free of charge, and online to assist customers to complete the replacement parts , until the machine running properly .
04.If necessary, we can arrange professional technical engineers to provide on-site service free of charge, but customers may need to undertake some travel expenses for our technical engineers.
Our company and many other companies formed a friendly and cooperative partnership
Contact Person: Nancy Shen