|Place Of Origin:||Guangdong, China||Power:||Electronic|
|Brand Name:||Sanwood||Usage:||Stability Temperature Humidity|
|Certification:||CE AND ISO||Warranty:||12 Months|
225L Rapid Environmental Test Chamber,
DIN53509 Environmental Test Chamber,
5KW Environmental Test Chamber
Automatic High Temperature Rapid Aging Chamber Ozone Aging Test Chamber for Wires/cables test
Ozone Aging Test Chamber Instructions:
ozone climatic test chambers is mainly suitable for polymer materials and products (rubber) of the resistance to ozone aging performance test. Ozone content in the atmosphere is very low, but it is the main factors of polymer materials aging. Ozone aging test chamber simulating and strengthen the ozone condition in the atmosphere, get approximate to actual use or reproduction of the test results in a short time. The studay of ozone effect regulation to rubber products, quickly identify and evaluate rubber materials resistance to ozone and antiozonant protection efficiency method,and then take effective aging proof measures to improve the service life of rubber products.
JIS K 6259 , ASTM1149 , ASTM1171, ISO1431, DIN53509 , GB/T13642, GB/T 7762-2003, GB 2951
Ozone Aging Test Chamber Applicable industries:
ozone climatic test chambers is widely used to control products quality in measuring quality control; Rubber & Plastics; automobile production; wire and cable; packing materials; instruments and meters; medical equipment; civilian nuclear energy; civil aviation; colleges and universities; research laboratories; inspection arbitration, and technical supervision departments and other rubber products.
Ozone Aging Test Chamber Characteristics:
ozone climatic test chambers Equipment by the occurrence of silent and efficient ozone generator ozone gas, and a certain amount of air processed, the switch in the mixture into the chamber, the continuous line UV detector to detect the concentration of ozone, ozone generator control feedback to the systems to control system settings according to the occurrence of effective control of ozone to the ozone chamber to maintain the appropriate concentration of work by heating humidification systems to meet all the test conditions.
Ozone aging resistance equipment for testing rubber and its products (satisfying) relevant standards: JIS K 6259 ASTM1149 ISO1431 GB/T7762 GB/T13642, etc... mainly used as a toolbox for antioxidant testing;
Ozone concentration: 20～1000 pphm (set direct reading) Ozone concentration deviation: GB 10% Test chamber temperature: Measurement range Room temperature～+80°C Temperature uniformity: ±2°C Relative humidity: Measuring range 60% or more Speed: 0～50mm/s Dynamic pull-up frequency: 0.5Hz New sample rack (each fixture can be installed with tensile test piece to meet the type I dumbbell piece and actual workpiece) Test gas flow rate: 0-80L/min.
The test methods are divided into dynamic and static tests:
1,Speed-regulating motor drives the sample holder device (satisfying the static tensile test, the running track of the test piece satisfies the principle of the cycloidal path)
2, Ozone concentration automatic digital display controller.
3, Dual beam "QUA" non-dispersive UV ozone detector.
4, Digital display automatic online measurement.
5, There is a metrology verification correction interface.
The ozone concentration/temperature and humidity setting
value controls the PID self-tuning, and the operation is
convenient and reliable.
Main material of the equipment:
1,Shell advanced wear-resistant paint coating / liner 304 # stainless steel.
2,AI digital display intelligent program control regulator.
3,Gas flow meter for precise control of gas flow at all levels. With "QUA" non-dispersive UV ozone detector (the most reliable and most popular method for detecting ozone in the world).
4,Bill-Lambert principle measurement application software (internationally recognized).
5,It is equipped with a gas purifier, a constant temperature bath, activated carbon absorption and a silica gel drying tower.
6,The ozone-containing gas stream is parallel to the sample.
Optional remote monitoring software (test data can be printed on a PC).
An interface to the classical chemical test ozone concentration is available.
A regulated power supply is installed inside the test chamber.
Ozone Aging Test Chamber technical Reference:
|Inner chamber size(mm)||500(W)*750(H)*600(D)|
|Outer chamber size(mm)||1150(W)*1650(H)*850(D)|
|Humidity deviation||+2/ -3%RH|
|Ozone concentration||0~3000pphm (adjustable)|
|Ozone concentration deviation||≤10%|
Contact Person: Nancy Shen