|
Product Details:
|
| Place Of Origin: | Guangdong, China | Type:: | Drying Oven |
|---|---|---|---|
| Outside Size: | With Requirement | After-sales Service Provided: | Engineers Available To Service |
| Warranty: | 1 Years | Temperature Uniformity: | ±3%（Test Point:100℃） |
| High Light: | SUS304 High Temperature Dry Oven,450L High Temperature Dry Oven,380V 60Hz High Temperature Dry Oven |
||
Battery Dry Chamber
Product features:
1.Explosion-proof High Temperature Dry Chamber is composed of the chamber, heating systems, air circulation system and control system. No refrigeration systems.
2.The High Temperature Test Chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate, surface electrostatic spraying.
3. Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber reach to 200C, 250C or 300C.
4. Remote control to Ethernet. (Optional) Sanwoood self-develop programmable touch screen temperature controller, with automatic calculation of PID function
5. Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber.
6. With transparent viewing window and lighting inside to observe the test (optional).
7.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions.
8.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement.
9.With various of safety protection device such as leakage and outage protection,compressor overpressure protection,overload fusing protection,audio signal alarm.
Structure and introduction:
| Standard configuration: |
| Cable port with silicone plug φ100mm x2 |
| Emergency stop switch |
| USB interface and history data review and converting software |
| Over temperature protection |
| Status indicator light |
Optional configuration:
| Multi-temperature Probe | Hydrogen induction device |
| Automatic fire extinguishing CO2 device | Intake and exhaust device |
| Explosion-proof chains | Pressure relief vent |
| Extinguishing manual/Auto | Smoke monitor |
Technical specification:
| Model | SM-G-450-DA | |
| Temperature | Temperature range | RT℃+10℃～200℃ |
| Temperature fluctuation | ±0.5℃ | |
| Heating rate | 25.0℃～100.0℃ within 8 mins 6.0～10.0℃/min | |
| Temperature uniformity | ±2.0℃ (25.0℃～100.0℃); ±2.5℃ (100.1℃～200.0℃); |
|
| Material | Internal material | stainess steel(SUS304) |
| External material | Cold rolled steel sheet / powder spraying | |
| Heat insulating material | mineral wool | |
| Fan | Centrifugal blower | |
| Heater | Nickel chromium alloy heating wire | |
| Size | Inner size(mm) W*H*D |
500x1500x600 |
| Outer size(mm) W*H*D |
950x1950x850 | |
| Volume(L) | 450L | |
| Power supply | 380V AC 50/60Hz | |
| Controller | SANWOOD programmable controller with touch screen | |
Contact Person: Nancy Shen
Tel: +8618025256059
