|Internal Materia:||SUS304 Stainless Steel(1.2mm)||External Material:||Cold-rolled Plate(1.2mm),powder Coating|
|Heat Insulation:||Polyurethane Foam(100mm)+glass Wool(10mm)||Fan:||Centrifugal Fan(Impeller Fan)|
|Refrigeration Compressor:||Hermetic Compressor(Tecumseh)||Evaporator:||Finned-tube Exchanger|
Automotive Walk In Climatic Chamber,
SUS304 Plate Climatic Chamber,
R408 Walk In Climatic Chamber
SANWOOD Walk-in Climatic Chamber
Temperature Humidity Test Chamber for Automotive Spares Testing
Walk in Climatic chamber Introduction:
The walk-in temperature and humidity test chamber is widely used in aerospace, aviation, electronics, automotive, battery and other industries to do electronic heating products, materials, parts, equipment, etc. Accelerated thermal cycle test, alternating thermal test and constant temperature test In addition, high and low temperature routine tests and low temperature storage can also be performed to evaluate the behavior of the sample under given environmental conditions.
Sanwood temperature and humidity test chamber features:
☆ The Protection Mechanism of the products to be tested return to normal temperature when test finished
☆ Suitable for the test when the product volume is larger or the product test quantity is more.
☆ Size can be designed according to the customer's needs and cooperate with customer factory relocation
☆ Safety latch and leakage Circuit Breaker Protective device (person)
☆ Inner chamber material SUS#304, Outer chamber material color steel plate
☆ Strong and powerful German semi closed compressor
☆ Automatic servo control of heating load adjusts refrigerant flow, which can withstand 3 times of heating load of traditional constant temperature and humidity chamber
☆ Customized the sample racks.
☆ Available for 80℃,85%RH test
Test standard comply:
● GB/T5170.2-2008 temperature test equipment
● GB/T5170.5-2008 damp heat test equipment.
● GB/2423.1-2008 (IEC60068-2-1:2007) low temperature test method AB.
● GB/2423.2-2008 (IEC60068-2-2:2007) high temperature test method BA.
● GB2423.3-93 (IEC68-2-3) Test Ca: Constant damp heat test method.
● GB2423.4-93 (IEC68-2-30) Test Db: Alternating damp heat test method.
● GJBl50.3 (MIL-STD-810D) low temperature test method.
Sanwood temperature and humidity test chamber technical parameter:
Contact Person: Nancy Shen