|
Product Details:
|
| Humidifier: | Steam Humidifier | Heater: | Nickel Chromium Alloy Heating Wire |
|---|---|---|---|
| Evaporator: | Nickel Chromium Alloy Heating Wire | Refrigerant: | R404A、R23、R508 |
| Condenser: | Semi-closed Germany Bock, Germany Bitzer | Fan: | Centrifugal Blower |
| High Light: | Solar PV Damp Humidity Test Chamber,R404A Humidity Test Chamber,R508 Humidity Test Chamber |
||
Customized Walk-in Environment Test Chamber for Solar PV Damp Heat Tests
Constant Temperature And Humidity Test Chamber Basic introduction
Sanwood Temperature and humidity test chamber simulating specimen under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.
Sanwood Temperature humidity test chamber meets the requirements of international standard (IEC61646 IEC61215, JIS C8917, GB...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods).
Constant Temperature And Humidity Test Chamber features:
1. Inner chamber material SUS#304; Outer case material: cold steel plate material with powder coating
2. Double-wing door with observation window in each door.
3. Customized Sanwood controller, multi-language programmable touch control system
4. Apply to larger amount products test, customized sample holder
5. Standard modular design for the chamber.
6. Damp heat test, thermal cycling test, humidity-freeze tests for solar PV cell, panel, module testing
7. Automatic water supply device with water filter for humidity application
8. Strong and powerful German bock semi hermetic compressor
9. Multi-group server Valve, the most appropriate amount of refrigerant control
10. Energy-saving 30%, water-saving 20%; Environment-friendly refrigerant11.
Temperature and humidity Test chamber Specification:
| Model | SMC-120-CC-WT | |
| Temperature | Temperature control range | -40℃～100℃ |
| Temperature fluctuation | ±0.5℃ | |
| Cooling rate |
100.0℃～25.0℃ cooling rate 2.0～3.0℃/min 25.0℃～-40.0℃ coolign rate 1.0～2.0℃/min |
|
| Heating rate | -40.0℃～100.0℃ heating rate 3.0～5.0℃/min | |
| Temperature uniformity | ±1.5℃ | |
| Humidity | Humidity control range | 20.0%RH～98.0%RH |
| Humidity fluctuation | ±1.5% RH | |
| Humidity uniformity | ±3.0％RH | |
| Material / components |
Internal material | Stainless steel(SUS304) |
| External material | Cold rolled steel sheet / powder spraying | |
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | |
| Fan | Centrifugal blower | |
| Compressor | Semi-closed Germany Bock, Germany Bitzer | |
| Condenser | Water-cooled | |
| Refrigerant | R404A,R23,R508 | |
| Evaporator | Fin - and - Tube Heat Exchanger | |
| Heater | Nickel chromium alloy heating wire | |
| Humidifier | Steam Humidifier | |
| Size | Interior size(mm) W*H*D | 1970x2100x3020 |
| Volume(m3) | 12.0 m3 | |
| Operating ambient temperature | +5 ~ 35℃ | |
| Power supply | 380V AC 50/60Hz | |
| Controller | Customized Sanwood controller SH5600 | |
Contact Person: Nancy Shen
Tel: +8618025256059
