|Internal Materia:||SUS304 Stainless Steel(1.2mm)||External Material:||Cold-rolled Plate(1.2mm),powder Coating|
|Heat Insulation:||Polyurethane Foam(100mm)+glass Wool(10mm)||Fan:||Centrifugal Fan(Impeller Fan)|
|Refrigeration Compressor:||Hermetic Compressor(Tecumseh)||Evaporator:||Finned-tube Exchanger|
R449A Environmental Stress Screening Chamber,
LCD Environmental Stress Screening Chamber,
SUS304 Environmental Stress Screening Chamber
Sanwood Customized Walk-in ESS Chamber
Temperature and Humidity Test Chamber for Vehicle Environmental Reliability Test
Walk-in Environmental chamber Introduction:
Sanwood walk-in temperature and humidity test chamber is widely used in aerospace, aviation, electronics, automotive, battery and other industries to do electronic heating products, materials, parts, equipment, etc. Accelerated thermal cycle test, alternating thermal test and constant temperature test In addition, high and low temperature routine tests and low temperature storage can also be performed to evaluate the behavior of the sample under given environmental conditions.
Sanwood temperature and humidity test chamber features:
☆ The Protection Mechanism of the products to be tested return to normal temperature when test finished
☆ Suitable for the test when the product volume is larger or the product test quantity is more.
☆ Size can be designed according to the customer's needs and cooperate with customer factory relocation
☆ Safety latch and leakage Circuit Breaker Protective device (person)
☆ Inner chamber material SUS#304, Outer chamber material color steel plate
☆ Strong and powerful German semi closed compressor
☆ Two stage refrigeration system
☆ Available for 80℃,85%RH test
☆ Customized features can be discussed: size, heating/cooling rate, humidity control range, safety devices, etc...
Test standard comply:
● GB/T5170.2-2008 temperature test equipment
● GB/T5170.5-2008 damp heat test equipment.
● GB/2423.1-2008 (IEC60068-2-1:2007) low temperature test method AB.
● GB/2423.2-2008 (IEC60068-2-2:2007) high temperature test method BA.
● GB2423.3-93 (IEC68-2-3) Test Ca: Constant damp heat test method.
● GB2423.4-93 (IEC68-2-30) Test Db: Alternating damp heat test method.
● GJBl50.3 (MIL-STD-810D) low temperature test method.
Sanwood temperature and humidity test chamber technical parameter:
Contact Person: Nancy Shen