|
Product Details:
|
| Function: | Explosion Proof | Temperature Mesaure Accuracy: | 0.5°C |
|---|---|---|---|
| Structure: | 4-in-1 | Temperature Control: | Separate Controller |
| High Light: | 408L Battery Test Chamber,380V 17A Climatic Test Chamber,SUS304 Climatic Test Chamber |
||
Thermal Aging Test Chamber for Lithium ion batteries Explosion Proof Chamber
Product Description
Sanwood thermal aging test chamber 4-in-1 design is a customised design for battery manufacturer, which is simulating the different temperatures conditions in each room. So there are 4 controllers in this design. Each room can be set a temperature different from others. The refrigeration system can be one-stage refrigeration system or two stage system, depends on the temperature control range.
Battery explosion proof thermal aging test chamber is mainly used for battery overcharge and discharge, charge and discharge test, the battery placed in the explosion-proof chamber at different temperatures, connect with charge and discharge tester externally, to determine the batteries performance and reliability at different temperature environment.
Thermal aging test chamber 4-in-1 main parameters
| Model | SM-125-CA-FB-4 | ||||
| Temp. range |
0°C ～80°C |
||||
| Temperature stability | High±0.5°C ,low ±1.0°C | ||||
| Temperature uniformity | ≤±2.0°C | ||||
| Heating Rate | 3.0 ~ 5.0℃/min | ||||
| Cooling Rate | 1.0 ~ 2.0℃/min | ||||
| Interior material | Stainless Steel Plate ( SUS 304) | ||||
| Exterior material | A3 plate with power coating. Color can be customized | ||||
| Inner size (WxHxD) mm | 500x500x500 for each room | ||||
| Working volume (L) | 500 L | ||||
| Power supply | 380V AC, 50Hz/60Hz 3 phase | ||||
| Sample holder | 2 pcs for each room, total 8 pcs | ||||
| Fittings | cable port(portΦ100mm) x4 (Size and quantity can be customized) | ||||
| Refrigeration system | Air Cooled (Water Cooled is option) | ||||
| Hermetic compressor | |||||
| One stage refrigeration system | |||||
| R408 AND R23 (Option: R449A, R508) | |||||
| Explosion proof devices: Can be customized per customer's requirement, HL0~6 per EUCAR or USCAR | |||||
|
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available 3. Controller SH-5600,The control panel is provided with USB or RS232 port, a battery surface temperature detection display light( will be divided into three level alarm), a battery fault alarm reminder, a harmful gas alarm, an exhaust indication light, an emergency stop switch, outfire indication light and over temperature protection |
|||||
Test standard comply and met:
GB 31241-2014,
GB/T 18287 -2013,
GB/T 8897.6-2008,
YD/T 2366.1-2011,
GB/T 21966-2008,
MT/T 1051-2007
IEC 62660, IEC 60082,
IEC 61960, IEEE 1625
Contact Person: Nancy Shen
Tel: +8618025256059
