|
Product Details:
|
| Usage: | IPX1, IPX2, IPX3, IPX4, IPX5, IPX6 | Inner Size: | Customized Size Available |
|---|---|---|---|
| Standard: | EN60529 GB 17001 | Color: | Sanwood White |
| Power Supply: | 380V 50Hz, Three Phase | Calibration: | YES |
| High Light: | IPX6 Flushing Rain Test Chamber,SUS304 Rain Test Chamber,Water Recycling Rain Test Chamber |
||
Rain Test Chamber IPX1, IPX2 dripping, IPX3, IPX4 spray IPX5, IPX6 flushing test
Sanwood is engaged in developing and manufacturing environmental reliability test chambers since 1995. Rain test chamber series are our standard products over years experience for industries. Rain Test Chamber is mainly used to test anti-rain and waterproof performance for products of plastics, rubber, paint, coatings, printing ink, paper, pharmaceuticals, food, cosmetics, textiles, auto parts, packaging materials, building materials, electricity and the electrical products; it provide an important testing data for scientific research, product development and quality control.
Sanwood rain test chamber IPX123456 is a combined test chamber with multi-functions of rain tests, IPX1, IPX2 dripping, IPX3, IPX4 spray IPX5, IPX6 flushing tests can be done automatically in ONE system.
Sanwood rain test chamber features
1. Stainless steel SUS$304 chamber body, outer coating with sanwood standard white colour (customized color is available as well).
2. Automatical test system and touch screen controller: the self-developed controller with waterproof grade IPX test operation interface can automatically carry out the test by directly selecting the waterproof grade in the touch screen.
3. Bench table can rotate and tilt at an angle as required.
4. Water recycle system: the chamber has its own water tank, circulating water, no need to build a professional waterproof test room.
5. Customized sizes and models are available in Sanwood.
Rain Test Chamber Technical parameters:
| Sanwood Integrated Rain Test Chamber IPX123456 IPX1, IPX2 tests | ||
| Inner chamber material D×W×H(mm) | 1000*1000*1000 | |
| Performance index | Drip plate height | 200～800mm(adjustable) |
| Drip plate size | 800x800mm | |
| Rainfall | 3～5mm/min | |
| Drip hole diameter | 0.4mm | |
| Test bench size | diameter 400(mm) | |
| Test bench angle | The horizontal center faces from both sides to 45° | |
| Lifting mode | up and down | |
| Sanwood Integrated Rain Test Chamber IPX123456 IPX3, IPX4 tests | |||
| Performance index | Radius of Water spraying ring | 400mm | |
| Water pipe diameter | 18mm | ||
| Nozzle hole diameter | 0.4mm | ||
| Aperture spacing | 50mm | ||
| Swing amplitude | ±45°,±60°,±90°,±180°(theoretical value) | ||
| Rotating speed | 1r/min | ||
| Sanwood Integrated Rain Test Chamber IPX123456 IPX5, IPX6 tests | ||
| Performance Index | IPX5 Nozzle diameter | φ6.3mm |
| IPX5 water flow | 12.5L/min | |
| IPX6 Nozzle diameter | φ12.5mm | |
| IPX5 water flow | 100L/min | |
| Flushing distance | 2.5 ~3.0m | |
| Swing amplitude | ±15° | |
| Rotating speed | 1~5r/min | |
| Operation Control System | Controller | SANWOOD touch screen controller, programmable |
| Water pressure control | Electromagnetic flowmeter or manual regulate flowmeter | |
| Observation | YES | |
| Water supply system | Water tank, booster pump | |
| Power supply | AC380V 50Hz, 3 Phase | |
| Safety protection | Leakage, short circuit, motor overheating | |
Rain Tests methods per EN60529
1. IPX1 Drip test: place the specimen in the test table, rotate speed 1r/min; the distance between specimen top surface to drip nozzle no more than 200mm; drip water flow 10.5mm/min and continous 10 mins for one test.
2. IPX2 15° angle drip test: the test table angel at 15° for one side and flow rate at 30.5mm/min and continous 2.5min; change to another 3 sides and total test time 10 mins.
3. IPX3 water spray test: choose the right radius pendulm pipe according to the specimen size, keep the test table surface at the horizontal line of the pendulm pipe diameter. Place the specimen on the test table and top surface to the spray nozzle is no more than 200mm. The water flow is 0.07L/mm per nozzle. Pendulm pipe swing angle 60° and 120°； and swing time of 2x120° is 4 second. Total test time 10 mins.
4. IPX4 water spray test: the spray area is each side 90° when pendulm pipe starts in the middle. Swing angle 180°, and swing time of 2x180° is 12 second. Total test time 10 mins.
5. IPX5 water flushing test: flushing nozzle 6.3mm inner diameter; water flow 12.5L/min (750L/h); Distance between flushing nozzle to specimen is 2.5m ~ 3.0m. Test time is around 1m2/min (specimen surface area) and 3 mins at least.
6. IPX6 water flushing test: flushing nozzle 12.5mm inner diameter; water flow 100L/min; Distance between flushing nozzle to specimen is 2.5m ~ 3.0m. Test time is around 1m2/min (specimen surface area) and 3 mins at least.
* Customized sizes and models are available. Inquiry Sanwood Sales Team for more details.
Contact Person: Nancy Shen
Tel: +8618025256059
