|RT+10°C ~ 150°C
|1-year (standard) Or More
|Battery Testing Machine
A3 Plate Thermal Aging Test Chamber,
Thermal Aging Test Chamber 450L,
380VAC Thermal Aging Test Chamber
Double-layer lithium ion batteries Thermal Aging Test Chamber Ex-proof
Double-layer lithium ion batteries Thermal Aging Test Chamber is a customized design in Sanwood. It's also called high temperature oven. The main function is for battery thermal aging test at different temperatures. There are two test rooms in upper and lower with different temperature thermostate for each chamber.
Structure and features
1. The double-layer lithium ion batteries thermal aging test chamber, is composed of the two chambers, heating systems, air circulation system and circuit and control system.
2. The double-layer lithium ion batteries thermal aging test chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic coating.
3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber.
4. Temperature sensor: Class A type PT100 sensor.
5. The chamber equip with two separate control system. Each chamber can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
6. Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber.
7.With larger transparent viewing window and lighting inside to observe the test.
8.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement; Can be equippe with more test holes to battery charge or discharge testing.
9.With various of safety protection device such as leakage and outage protection,compressor overpressure protection,overload fusing protection,audio signal alarm.
10. With various of explosion proof safety devices, according to your test needs after compared to the EUCAR Hazard level or USCAR.
Double-layer lithium ion batteries Thermal Aging Test Chamber Specification
|High±0.5°C ,low ±1.0°C
|3.0 ~ 5.0℃/min
|Stainless Steel Plate ( SUS 304)
|A3 plate with power coating. Color can be customized
|Inner size (WxHxD) mm
|600x750x500 for each room
|Working volume (L)
|380V AC, 50Hz/60Hz 3 phase
|2 pcs for each room, total 4 pcs
|cable port(portΦ100mm) x4 (Size and quantity can be customized)
|Explosion proof devices: Can be customized per customer's requirement, HL0~6 per EUCAR or USCAR
|1. We reserve the right to change specifications without prior notice
|2. Customized sizes and configurations available
|3. Controller SH-5600,The control panel is provided with USB or RS232 port, a battery surface temperature detection display light( will be divided into three level alarm), a battery fault alarm reminder, a harmful gas alarm, an exhaust indication light, an emergency stop switch, outfire indication light and over temperature protection
Contact Person: Nancy Shen