|
Product Details:
|
| Temperature Range: | RT+10C ~ 100C | Working Size: | 600x600x600mm |
|---|---|---|---|
| Standard: | IEC62133 | ||
| High Light: | Double Layer Battery Thermal Dry Oven,Thermal Dry Oven IEC62133,Heat Resistance Temperature Test Chamber |
||
Double-layer Explosion Proof Temperature Test Chamber
for battery thermal abuse test
Sanwood double-layer explosion proof temperature test chamber is a customised product, mainly to test batteries, battery cells, packs, modules and battery management systems, and energy storage system related products. It's used to simulate a high temperature environment to help to test the products heat resistance at different temperatures.
Main test standards comply:
IEC62133 Thermal abuse test; high ambient temperature stress test;
IEC62660 High temperature endurance
Without the explosion proof safety devices, the chamber can be used to normal dry oven.
Technical Specifications
| Model No. | SMG-216-DA-2 |
| Inner size | 600x600x600mm |
| Total working volume | 432L |
| External size (WxHxD) | About 1200x1750x1050 |
| Temperature control | RT+10℃～100℃ |
| Temperature fluctuation | ±0.5℃ |
| Heating rate | 3.0～5.0℃/min |
| Temperature uniformity | ±2.0℃ |
| Fan | Centrifugal blower |
| Heater | Nickel chromium alloy heating wire |
| Standard configuration | 1 set pressure relief port, 1 sets explosion-prood chains for each room |
| Operating ambient temperature | +5 ~ 35℃ |
| Power supply | 380V AC 50/60Hz 3 Phase |
| Controller |
Sanwood customised controller, touch screen |
| Explosion-proof devices |
1) CO2 fire extinguisher 2) Exhaust valve 3) Multi-temperature monitor system |
The control panel is provided with USB or RS232 port, a battery surface temperature detection display light( will be divided into three level alarm), a battery fault alarm reminder, a harmful gas alarm, an exhaust indication light, an emergency stop switch, outfire indication light and over temperature protection.
Contact Person: Nancy Shen
Tel: +8618025256059
