|Place Of Origin:||Guangdong, China||Power:||Electronic|
|Brand Name:||Sanwood||Usage:||Stability Temperature Humidity|
|Certification:||CE AND ISO||Warranty:||12 Months|
thermal shock test equipment,
thermal test chamber
High Accuracy Thermal Shock Test Chamber
Thermal Cycling Test Equipment for Electrical Products Environmental test
Thermal Shock Test Chamber,Thermal Chamber,Thermal Shock Chamber used to test the material structure or composite material in an instant by the extremely high temperatures and very low temperature continuous environment which can endure the degree of order in the shortest possible time to test its thermal expansion and contraction caused by chemical changes physical harm.
The applicable the object material, including metals, plastics, rubber, electronic, etc., can be used as the basis of its product improvement of reference.
Thermal shock test chamber Briefly introduction:
High and low temperature (two cases) thermal shock test chamber system structure can be divided into two parts. Namely, high temperature tank (preheating zone), cryogenic tank (pre-cooling zone).
Thermal shock test chamber Testing principle
Testing principle mainly through controlling the portable basket (test samples District) to quickly move between cryogenic tank and high temperature tank to achieve rapid thermal shock test. The whole testing process test samples along with mobile gondola to move together. The test chaber is suitable for the examination of the whole set of products, components, parts and materials subjected to rapid changes in temperature. The temperature impact test chamber are used in a shortest time to evaluate the test samples due to thermal expansion and contraction caused by the changes of chemical or physical damage.
The advantages of SANWOOD thermal shock test chamber
1.Temperature and humidity setting protection
2.Two zone thermal shock test chamber. Air pressure driven test area(sample)
3.Error failure medical record table cartilage device
4.HFC environmentally friendly refrigerant, SWEP plate heat exchanger, two type refrigeration system
5.Optimal structure and high efficiency refrigeration machinery design
6.Air intakes and returns with sensor control
7.Sever Valve, Kinetic energy automatic load control
8.Testing range: 150(60)℃~ (-10)-65℃
9.50% power saving efficiency and automatic servo control
10.Compatible with BUS CM remote monitoring management system
11.Can expanded: LN2V liquid nitrogen rapid cooling control device
12.Thermal shock test chamber movement time is 10 seconds.Can meet MIL, IEC and JIS standard.
13.Wind valve switching time is 10 seconds
14. Thermal shock test chamber temperature recovery time is 5 minutes, can meet the test specification
15.The end of the experiment, the product automatically return to the normal temperature to avoid frost dew
16.The world's first built-in USB2.0 interface digital recorder (recording can be plugged in at any time)
17.Industrial grade upright full-color touch multilingual programmable control system
18.The world's first standard shipping included USB2.0 and disk storage machine dual interface
19.The protective mechanism of return to normal temperature after the test is finished.
20.The world's first complete test curve analysis shows that there is no time limit.
Standard models and technical parameters:
|Temperature||Temperature impact range||-65℃～150℃ (A:-45℃～150℃;B:-65℃～150℃；)|
|25.0℃～-75.0℃ Within 60 mins
|25.0℃～150.0℃ Within 45 mins 3.0～7.0℃/min|
|Temperature conversion time||3s|
|Temperature recovery time||Within 5 mins|
|Internal material||Stainless steel(SUS304)|
|External material||Cold rolled steel sheet / powder spraying|
|Heat insulating material||100mm thickness polyurethane plate＋10mm
thickness mineral wool
|Compressor||fully closed or semi-closed||semi-closed|
|Condenser||Air cooling, water cooling|
|Evaporator||Fin - and - Tube Heat Exchanger|
|Heater||Nickel chromium alloy heating wire|
|Operating ambient temperature||+5 ~ 35℃|
|Power supply||380V AC 50/60Hz|
|Controller||SANWOOD SH5600:Equipped with RS232, RS485 port；
(7.0 inch controller) USB data export
Welcome to inquiry for product details.
Contact Person: Nancy Shen