Product Details:
|
Temperature Impact Range: | -70℃~150℃ (A:-45℃~150℃;B:-70℃~150℃) | Temperature Fluctuation: | ±1.0℃ |
---|---|---|---|
Low Temperature Precooling Time: | 25.0℃~-70.0℃ Within 60 Mins 1.0~3.0℃/min | High Temperature Preheating Time: | 25.0℃~200.0℃ Within 60 Mins 3.0~7.0℃/min |
Temperature Conversion Time: | 3S | Fan: | Centrifugal Blower |
High Light: | thermal shock test equipment,thermal cycling chamber |
Auto Electronic Thermal Shock Test Tester Environmental Test Chamber
Features
· Large-volume test area The test area can contain up to sixty substrates, when set vertically
· Easy wiring access Clear cabinet sides allow easy access for specimen measurement
· Cable ports are provided on the right as well as left sides of the chamber
· Door hinge with self-closing prevention
· Main Power: North American standard 208V (alternate international power: 200V, 220V, 380V, or 400V)
· Cooling water supply
· Quiet operation with sound levels below 65dB
· Paperless recorder with color display and CompactFlash storage
· Strip chart recorder
· Computer interface (RS-232)
· Overcool protection
· Casters
· Specimen basket / shelf bracket
Model | SM-50-3P-A | SM-80-3P-A | SM-100-3P-A | SM-150-3P-A | SM-200-3P-A | SM-300-3P-A | SM-500-3P-A | |
Temperature | Temperature impact range |
-70℃~150℃ (A:-45℃~150℃;B:-70℃~150℃;) | ||||||
Temperature fluctuation |
±1.0℃ | |||||||
Low temperature precooling time |
25.0℃~-70.0℃ Within 60 mins 1.0~3.0℃/min | |||||||
High temperature preheating time |
25.0℃~200.0℃ Within 60 mins 3.0~7.0℃/min | |||||||
Temperature conversion time |
3S | |||||||
Temperature recovery time |
Within 5 mins | Within 10 mins | ||||||
Material / components |
Internal material | Stainless steel(SUS304) | ||||||
External material | Cold rolled steel sheet / powder spraying | |||||||
Heat insulating material |
100mm thickness polyurethane plate+10mm thickness mineral wool | |||||||
Fan | Centrifugal blower | |||||||
Compressor | France Tecumseh, Germany Bock, Germany Bitzer | |||||||
Condenser | Air cooling, water cooling | water cooling | ||||||
Refrigerant | R404A,R23,R508 | |||||||
Evaporator | Fin - and - Tube Heat Exchanger | |||||||
Heater | Nickel chromium alloy heating wire | |||||||
Size | Interior size(mm) W*H*D |
350*400 *350 |
400*500 *400 |
500*500 *400 |
500*600 *500 |
650*460 *670 |
960*460 *670 |
960*650 *800 |
Outer size(mm) W*H*D |
1400*1750 *1750 |
1450*1850 *1800 |
1550*1850 *1800 |
1550*2050 *2050 |
1700*2000 *2200 |
2050*2000 *2250 |
2050*2150 *2450 |
|
Volume(L) | 50L | 80L | 100L | 150L | 200L | 300L | 500L | |
Operating ambient temperature | +5 ~ 35℃ | |||||||
Power supply | 380V AC 50/60Hz | 380V AC 50/60Hz | 380V AC 50/60Hz |
380V AC 50/60Hz |
380V AC 50/60Hz |
380V AC 50/60Hz |
380V AC 50/60Hz |
|
Controller | SANWOOD SH5600:Equipped with RS232 port;(7.0 inch controller) USB data export ) |
Product Catalog:
Three-zone Thermal Shock Test Chamber.pdf
Contact Person: Nancy Shen
Tel: +8618025256059